10 Media Wall Ideas for Vancouver Homes

You notice the room first at night. The TV is mounted too high on a bare wall, the soundbar cord still shows from one angle, and the router, game console, and power bar have taken over a corner that was supposed to feel clean and finished. I see this in Vancouver condos, Burnaby townhomes, and older detached houses from East Van to West Vancouver.

Good media wall ideas solve a practical renovation problem. They organize wiring, add storage, improve lighting, and give the room a focal point that fits the architecture instead of fighting it. In character homes, that can mean working around original baseboards, uneven plaster, and trim worth keeping. In newer homes, it often means getting rid of the furniture pileup and using one wall properly.

Local conditions matter. In Greater Vancouver, the right design depends on the age of the home, the type of wall you are building on, strata rules if you are in a condo, and whether the project includes new circuits, low-voltage wiring, or an electric fireplace that may need permit review. Heritage houses in Vancouver and New Westminster need a lighter touch than a new-build in Coquitlam. A media wall that works in a wide West Vancouver living room may feel oversized in a Brentwood condo.

Budget matters too. A simple finish-and-mount setup can stay relatively controlled. Once the plan includes custom millwork, new electrical, patching, lighting, and fireplace integration, pricing climbs fast in this market. Homeowners who plan the lighting early usually avoid some of the most common change-order costs later, especially if they review the [cost of installing recessed lighting] (https://domicile.construction/cost-of-installing-recessed-lighting/) before finalizing the wall design.

The best results come from matching the wall to the room, the house, and the budget. The options below cover clean condo-friendly layouts, higher-end built-ins, and designs that make sense in older Greater Vancouver homes where every inch and every existing detail counts.

1. Floating Shelving with Integrated LED Lighting

Floating shelves work best when the room already has decent bones and doesn’t need a full built-in wall. In a condo in Burnaby or a smaller character home in East Vancouver, this approach keeps the wall lighter and avoids the heavy look that floor-to-ceiling cabinetry can create.

The mistake is treating shelves and lighting as a decorating project instead of an electrical one. If the wiring path, transformer location, and switch placement aren’t planned before drywall or patching, you end up with visible raceways, bulky trim pieces, or service headaches later.

Where this style works best

This is one of the most flexible media wall ideas for open-concept homes. It suits minimalist interiors, but it also works in heritage houses when you want to preserve original casings and still add a modern focal point.

A few practical rules matter more than the shelf style itself:

• Use warm lighting: Warm white LED strips around 2700K usually feel better in living spaces than cooler lighting.
• Keep the display loose: Shelves look better when they aren’t packed full. Leave visual breathing room.
• Reinforce properly: Hidden brackets only look elegant if the shelf is fixed into solid framing.

Practical rule: Plan the power, low-voltage wiring, and lighting drivers before the wall is closed up. Retrofitting almost always costs more and looks worse.

If you’re adding accent lighting as part of a larger renovation, it helps to understand the broader cost of installing recessed lighting before finalizing the media wall layout.

2. Built-in Cabinetry with Framed TV Surround

A common Vancouver renovation problem looks like this. The living room has good bones, the TV is oversized for the wall, and every cable box, modem, and game console ends up on display. Built-in cabinetry fixes that, but only when the millwork is sized for the room, the equipment, and the house itself.

A framed TV surround gives the screen a defined place on the wall and makes the whole setup feel intentional. It also creates storage where families actually need it. That usually means closed base cabinets for components and everyday clutter, with the TV surround detailed to suit the home rather than copied from a showroom display.

I recommend this approach often in Greater Vancouver, especially in character homes in East Vancouver, older houses in Burnaby, and larger living rooms in West Vancouver where a plain wall-mounted TV can look under-scaled. In heritage homes, the detailing matters. The surround should respect existing casings, picture rails, or traditional proportions instead of forcing a heavy modern box into the room. In newer condos and duplexes, the same idea works with flatter slab doors and tighter reveals.

What makes it work

The first decision is depth. Homeowners usually want as much storage as possible, but deep cabinets can steal floor area fast, especially in narrower living rooms common in Vancouver and North Burnaby. I usually keep lower cabinetry practical rather than oversized, then leave enough clearance for circulation, furniture placement, and door swings.

The second issue is future fit. TVs change. Soundbars change. Internet hardware changes. If the opening is built too tightly around one specific screen, the next replacement can turn into a patching and millwork job. A little extra tolerance around the TV, plus accessible cable routing, saves money later.

Heat and service access matter just as much as appearance. Routers, receivers, gaming consoles, and power management equipment all generate heat inside closed cabinets. That calls for venting, removable back panels, or a serviceable compartment layout. I have seen expensive millwork jobs undermined by one basic miss, no practical way to reach a failed component without unloading half the cabinet.

For family homes in Richmond or Coquitlam, the best balance is usually closed storage below with a restrained amount of display space. For inspiration on millwork detailing that adds texture without making the wall too busy, these shiplap and paneled wall ideas for living spaces can help.

One local note. If this built-in is part of a larger renovation, confirm electrical scope early and check whether permits are required for added circuits, fireplace integration, or wall alterations. In protected heritage properties, even trim profiles and wall changes may need a more careful review before fabrication starts.

3. Accent Wall with Textured or Patterned Finishes

Some rooms don’t need a full cabinet wall. They just need the TV area to stop looking accidental. That’s where an accent wall earns its keep.

Textured paneling, wallpaper, painted slat details, or a simple wood backdrop can create enough presence for the screen without turning the whole wall into a millwork project. This approach is often the sweet spot for homeowners who want a finished look but don’t need deep storage.

Good texture versus too much texture

The best accent walls support the TV instead of competing with it. That usually means controlled texture, not a loud pattern directly behind the screen. Matte finishes tend to perform better than shiny ones because they cut glare.

A few combinations work reliably:

• Vertical slats: Good for newer homes that need warmth without fussiness.
• Painted tongue-and-groove: Useful in transitional spaces and farmhouse-inspired renovations.
• Subtle wallpaper or grasscloth look: Better in sitting rooms where the TV isn’t always the main focus.

If you’re considering panel-style finishes, these shiplap wall ideas are a useful reference point for getting the texture right without making the wall feel busy.

In North Vancouver and West Vancouver homes with a lot of natural light, I’d also pay attention to how the finish changes through the day. Deep charcoal may look rich at night but can feel flat if the room gets heavy grey daylight most afternoons.

4. Linear Electric Fireplace Integration

A lot of Greater Vancouver homeowners ask for a TV over a fireplace because it looks clean in photos and saves wall space. It can work well, but only if the wall is sized, framed, and powered for both pieces from the beginning. In a typical Burnaby renovation or a narrower Vancouver character home, forcing both onto one wall often creates two problems at once. The screen ends up too high, and the fireplace starts to feel undersized.

Electric linear units are usually the best fit for local renovation work. They avoid venting complications, they are easier to coordinate in condos and townhomes, and they give more flexibility when wall depth is limited. In older houses, especially where plaster, chimney remnants, or uneven framing are already part of the job, that flexibility matters.

The main constraint is not style. It is clearance, viewing height, and access for future service.

I usually recommend this layout only when the room can support proper proportions. A long fireplace under a mid-sized TV generally looks better than trying to stretch a very large screen over a short firebox. In West Vancouver custom homes, there is often enough wall width to do that well. In East Van bungalows and many North Burnaby living rooms, the better call is sometimes a sidewall media unit or a recessed TV without a fireplace at all.

A few practical checks help decide quickly:

• Confirm the manufacturer clearances first: Heat management rules vary by unit, and they should drive the framing plan.
• Set the TV height from seating, not from the fireplace opening: Comfort beats symmetry every time.
• Plan electrical early: Most media walls need dedicated power locations for the fireplace, TV, soundbar, and low-voltage runs.
• Leave an access strategy: Hidden components still need a way to be serviced without opening finished millwork.
• Check strata and permit conditions where they apply: Condo and townhouse projects in Metro Vancouver often have tighter rules around electrical work and wall alterations.

Finish choice matters here too, but for a different reason than on a standard feature wall. The fireplace already adds visual weight, so the surround usually looks better with restraint. Large-format tile, painted millwork, plaster-look finishes, or simple wood paneling tend to hold up better than busy mantels and heavy trim details. In heritage homes, I usually keep the new insert clearly contemporary rather than trying to fake an original fireplace surround that was never there.

For homeowners still comparing custom work against furniture-based options, Tip Top Furniture's media console guide gives a useful consumer-level overview. If you are also weighing how the TV wall should relate to the rest of the room, these expert tips for gallery wall design can help you judge visual balance, even if you go in a more built-in direction.

5. Gallery Wall Media Display

A gallery wall can solve one of the biggest visual problems with televisions. It stops the screen from looking like a black rectangle dropped onto a plain wall. In homes with art, family photography, or collected pieces, this approach can make the media zone feel layered and personal.

It works especially well in older Vancouver houses where a perfectly minimalist feature wall would feel out of place. A television surrounded by framed prints or family photos can sit more comfortably in a room with character trim, older windows, and lived-in furniture.

Keep the television from becoming the odd piece out

The easiest mistake is making the TV the only oversized dark object in a field of delicate frames. The second mistake is crowding the arrangement so tightly that nothing has room to breathe.

A better approach is to build the composition around scale and balance:

• Repeat frame finishes: Black, white, or natural wood usually keeps the arrangement coherent.
• Mix sizes deliberately: One or two larger pieces help the wall feel grounded.
• Set the TV at a comfortable height first: Art should follow the viewing position, not the other way around.

A gallery wall needs planning on the floor first. Once people start drilling by instinct, spacing usually drifts.

If you want inspiration for layout logic rather than just pretty photos, these expert tips for gallery wall design are worth reviewing before you commit to nail holes.

6. Minimalist Recessed TV with Hidden Components

A recessed TV can make a living room feel calm and intentional, especially in newer Vancouver condos where every visible shelf adds visual noise. It also creates one of the easiest media walls to get wrong. If the recess is too tight, the screen sits in shadow, the proportions feel heavy, and servicing the wiring later turns into drywall repair.

The clean look appeals to homeowners from Burnaby infill builds to West Vancouver custom homes, but the detailing has to suit the house. In a heritage or character home, I would be careful about cutting into original plaster, exterior walls, or old framing without a clear plan. The finished result should look fully integrated, not forced into a room that was never meant to hold it.

What to resolve before framing starts

This design lives or dies on coordination. TV depth, bracket depth, outlet location, low-voltage rough-in, backing, trim tolerance, and venting all have to be decided before the wall is closed up.

Heat management is a practical issue, not a design footnote. TVs, receivers, gaming consoles, and streaming boxes all generate heat, and recessed cavities need a path for that heat to escape. In some layouts, passive venting is enough. In others, the components belong in side cabinetry or a nearby closet instead of behind the screen. I also plan for service access because screens change size, ports move, and homeowners rarely keep the same setup forever.

Before approving this type of build, I would want clear answers to three things:

• Where will the components sit: Behind the TV, in millwork below, or in a separate AV location?
• How will the cavity vent: Through upper and lower grilles, an adjacent cabinet, or a different layout altogether?
• What happens at replacement time: Can the next TV fit the opening without reframing the wall?

There is also a code and planning side to this in Greater Vancouver. Power and low-voltage should be routed properly inside the wall, backing should be installed where the mount needs it, and fireplace clearances matter if this concept is being combined with another feature. In older Vancouver houses, hidden conditions inside the wall can add cost fast, especially if insulation, plaster repair, or electrical upgrades are already on the table.

A recessed television is not always the best answer. In a dedicated media room, a projector may keep the wall quieter and give you more flexibility on screen size. This guide to projector on the ceiling options is a useful comparison if you are deciding between a recessed TV and a projection setup.

A quick visual reference helps here:

7. Statement Wood Paneling with Warm Lighting

A lot of Vancouver living rooms have the same problem. Good furniture, decent light, a large TV, and one blank wall that still feels unfinished. Wood paneling solves that quickly because it adds texture, warmth, and scale without turning the room into a feature wall that dates itself in two years.

This option works especially well across Greater Vancouver because the housing stock is so mixed. In Burnaby and Coquitlam, it can soften newer interiors that feel too sharp or monochrome. In Vancouver character homes and some North Shore renovations, it can introduce modern AV features without fighting the age of the house.

The species, cut, and finish matter more than homeowners expect. White oak works well in brighter West Side and West Vancouver interiors. Walnut or smoked finishes suit moodier rooms but can make smaller spaces feel heavier. Painted tongue-and-groove can be the right move in heritage homes where a flat veneer panel would look out of place.

The detailing has to be handled properly too.

In older Vancouver houses, I treat concealed wiring and mounting points carefully because plaster walls, uneven framing, and previous renovations often hide surprises. Electrical work still needs to meet current code, and any new outlets, lighting, or hardwired components should be planned with that in mind before the paneling goes on. In protected or heritage-influenced homes, the goal is usually to add the media wall in a way that respects existing trim, sightlines, and proportions rather than imitating original millwork badly.

Warm lighting is what makes this idea work. Keep it indirect. A soft 2700K glow behind side reveals, under a shelf, or at the panel edges usually looks better than bright exposed LED strips. Too much light flattens the grain and makes custom millwork look commercial.

Budget is where the trade-offs show up. A simple slat wall with surface-mounted TV backing can stay in a mid-range budget. Full veneer panels with integrated lighting channels, stain-grade finishing, and custom trim detailing land much higher, especially once electricians and painters are involved. If the room already needs wall repair or electrical upgrades, costs in Vancouver climb fast.

8. Multi-Functional Modular Media Systems

A lot of Greater Vancouver homeowners do not need millwork that is fixed in place for the next 20 years. In a Burnaby condo, a townhome in New Westminster, or a family room that keeps changing with kids, modular media systems often make more sense than custom built-ins.

They work best when the room has to do more than one job. TV storage, toys, routers, speakers, books, and display items can all live in one system, and the layout can change later without opening walls or rebuilding cabinetry. That flexibility matters in strata properties, rental-friendly renovations, and homes where a future move is realistic.

The trade-off is visual finish. A modular setup rarely looks as custom-fit as built cabinetry, and lower-grade units show their weaknesses fast once they are carrying real weight. I see the same problems repeatedly. Shelves bow, doors drift out of alignment, backing panels loosen, and cords end up visible because the system was designed for a showroom wall, not an occupied living room.

In Vancouver-area projects, I suggest checking four things before buying:

• Wall fixing points: Tall units and mounted sections still need proper anchoring, especially in condos with steel studs or older homes with inconsistent framing.
• Usable depth: Many off-the-shelf cabinets look clean but do not fit receivers, gaming consoles, or cable management once doors are closed.
• Ventilation: Closed modular boxes can trap heat around electronics faster than homeowners expect.
• Access for servicing: Leave enough room to reach plugs, swap components, and reset equipment without dismantling the whole wall.

Code and building conditions still matter here. If you are adding new receptacles, hardwiring lighting, or concealing cords in the wall, the electrical work has to meet current BC requirements. In older Vancouver and East Van houses, plaster, patchwork framing, and previous renovations can also limit how neatly a modular system sits against the wall. In heritage homes, modular pieces are usually the safer choice when you want storage and TV function without cutting into original trim or changing character details permanently.

Budget is one reason this option stays popular. Entry-level modular systems can suit a tighter condo refresh. Mid-range setups with better hardware, taller panels, and integrated storage look more intentional. Once homeowners start adding custom fillers, upgraded electrical, wall reinforcement, and higher-end finishes, the price can creep close to a basic custom installation. At that point, compare both options carefully.

The broader product market supports that practical approach. Analysts at Grand View Research’s interactive video wall market analysis found strong adoption for standardized layouts and components. For homeowners, the takeaway is straightforward. Standard-size parts are usually easier to source, replace, and budget for over time.

9. Stone or Brick Accent Wall with Contrasting TV Mount

Stone and brick can look fantastic on a media wall, but they’re unforgiving materials. The wall either feels grounded and architectural, or it feels heavy and overdone. There isn’t much middle ground.

This style tends to work best in loft-like spaces, larger family rooms, and homes with enough scale to carry the texture. In tighter rooms, a full masonry-look wall can overwhelm everything around it.

Where contractors need to think ahead

The sequence matters. Electrical rough-in, blocking, backing, and mount locations should be confirmed before the finish goes on. Once stone or brick veneer is installed, corrections get messy fast.

The visual contrast is what makes this idea succeed. A slim black mount, clean screen, and simple nearby shelving keep the wall from looking too rustic. Fine display quality also matters more on textured backdrops, especially in premium living spaces. LED technology led the video wall market with 59% of global revenue share in 2024, while fine pixel pitch displays reached 55.4% adoption in Q1 2025, according to Grand View Research’s video wall market report. In plain terms, sharper displays help modern screens hold their own against visually strong materials like stone, slate, or brick.

Heavy wall finishes demand restraint everywhere else. Keep the mount, shelf lines, and decor simple.

10. Sustainable and Eco-Conscious Media Wall Design

A Vancouver homeowner might ask for a media wall built with reclaimed wood, then choose a layout that buries cables, blocks service access, and forces a full tear-out when the TV changes in five years. That is not sustainable. A better approach is to reduce waste over the life of the installation, use healthier materials, and build the wall so it can be repaired and updated.

That approach matters across Greater Vancouver. In newer condos in Burnaby, space is tight and future access matters. In heritage houses in Vancouver and New Westminster, preserving existing trim, plaster details, or original proportions can be the smarter move than replacing everything with new millwork. In West Vancouver, clients often want premium finishes, but the most responsible choice is still the one that lasts and does not need to be redone early.

What actually makes a media wall more sustainable

Start with materials that wear well and can be refinished or repaired. FSC-certified wood products, low-VOC paints, formaldehyde-conscious sheet goods, and durable laminates all have their place, depending on the budget. I also look at where the material is going. A painted MDF detail in a dry room may be fine. A lower cabinet edge in a busy family room usually needs something tougher.

Serviceability is the next big one. Leave access to outlets, data lines, and connection points. Use cabinet backs, removable panels, or planned chases so an electrician or AV tech can work on the wall without cutting it open. That single decision often prevents a lot of waste later.

Lighting and heat choices matter too. LED strip lighting uses little power, runs cooler than older options, and generally lasts longer. If the design includes an electric fireplace, modern units are usually a more practical fit for media walls than gas because they avoid venting requirements and are easier to integrate into finished living spaces. Efficiency still varies by product, so check the actual specs instead of assuming every feature wall fireplace performs the same way.

Accessibility should be part of the discussion, even if the project is not framed that way. Many media wall inspiration photos ignore glare, seated sightlines, switch height, and reachable storage. In real homes, those decisions affect whether the wall still works for the household ten or fifteen years from now.

Local code and house type also affect sustainable choices. In condos, strata rules may limit electrical changes or fastening methods. In older homes, opening walls can uncover insulation, wiring, or fire-blocking issues that need to be corrected to current code during the renovation. A design that works with the existing structure, instead of fighting it, usually saves money and reduces material waste.

For budgeting, I’d split this into three rough tiers for the Vancouver market. Entry-level means low-VOC paint, off-the-shelf cabinets, and a clean layout with access panels. Mid-range adds better sheet goods, longer-lasting hardware, and more custom fitting around the room. Premium projects can justify FSC-certified veneers, high-end low-emission finishes, and millwork built for disassembly and future upgrades.

Sustainable media walls are built to last, built to be serviced, and built so the next update does not start with demolition.

10-Option Media Wall Design Comparison

Design Option	Implementation Complexity 🔄	Resource Requirements ⚡	Expected Outcomes ⭐📊	Ideal Use Cases 💡	Key Advantages ⭐
Floating Shelving with Integrated LED Lighting	Moderate, precise mounting + electrical planning	Medium, shelving, LED strips, electrician, stud reinforcement	Sleek, minimalist display with ambient/task lighting; limited heavy storage	Contemporary/transitional homes; display-focused living areas	Clean gallery look, flexible layout, added ambiance
Built-in Cabinetry with Framed TV Surround	High, custom carpentry and coordinated trades	High, bespoke millwork, electrician, carpenter, finish work	Cohesive, furniture-like focal point with substantial organized storage	Heritage renovations, family rooms needing concealed storage	Large storage capacity, hides cables, increases home value
Accent Wall with Textured or Patterned Finishes	Low–Moderate, surface prep and finish installation	Low–Medium, wallpaper/panel/veneer, painter/installer	Strong visual focal point and depth without major structural work	Quick renovations, cost-conscious homeowners, renters (temporary options)	Affordable, fast update, highly changeable
Linear Electric Fireplace Integration	Moderate, electrical circuit + installation coordination	Medium, fireplace unit, electrician, finishing materials	Warm, luxurious focal point with supplemental heat and ambiance	Homes without vents, condos, open-concept living spaces	Adds warmth and mood with minimal structural change
Gallery Wall Media Display	Low–Moderate, planning and careful hanging	Low, frames, artwork, hanging hardware (optional pro service)	Highly personalized, art-forward focal area; visually engaging	Homeowners with art/photography collections, heritage homes	Emotional impact, cost-effective, easily updated
Minimalist Recessed TV with Hidden Components	Very High, structural framing, HVAC & electrical coordination	Very High, recessed framing, HVAC, electrician, custom finishes	Ultra-clean, clutter-free aesthetic with concealed tech; limited retrofit flexibility	Luxury renovations, minimalist/open-concept spaces	Most seamless, high-end appearance; protects electronics
Statement Wood Paneling with Warm Lighting	Moderate, panel installation + lighting integration	Medium–High, quality/reclaimed wood, finishers, lighting	Warm, character-rich backdrop that improves acoustics and comfort	Heritage homes, rustic/transitional living rooms	Cozy, sustainable options (reclaimed), strong visual warmth
Multi-Functional Modular Media Systems	Low–Moderate, assembly and secure anchoring	Low–Medium, modular units, hardware; minimal trades	Flexible, reconfigurable storage and display; less seamless than built-ins	Renters, young families, condos, those who move often	Affordable, adaptable, easy to update or reconfigure
Stone or Brick Accent Wall with Contrasting TV Mount	High, masonry + structural reinforcement	High, stone/veneer, masons, possible engineering work	Dramatic architectural focal point; very durable and long-lasting	Loft/industrial conversions, heritage-to-modern transformations	Strong visual impact, durability, increases property value
Sustainable and Eco-Conscious Media Wall Design	Moderate, sourcing sustainable materials and skilled trades	Medium–High, certified/reclaimed materials, specialist contractors	Lower environmental impact, improved indoor air quality, long-term savings	Eco-conscious homeowners, LEED/green-certified projects	Reduced footprint, healthier materials, market appeal

From Idea to Installation Your Next Steps

A media wall usually looks straightforward at the idea stage. Then actual constraints show up. The TV size drives the wall width, the soundbar needs clearance, the electrician needs a final layout before boarding, and a fireplace changes both material choices and clearances.

That is why the best option is usually the one that fits the house and the renovation scope, not the one that looked strongest in a saved photo. In a Burnaby condo, that might mean a cleaner floating-shelf layout with limited wall depth and simpler wiring. In a North Vancouver character home or a West Vancouver custom renovation, it may make more sense to build full-height millwork that matches existing trim, hides uneven walls, and gives the room proper storage.

Trade coordination matters here more than many homeowners expect. A typical media wall can involve framing, electrical, low-voltage wiring, drywall, millwork, painting, tile or stone, and sometimes fireplace supply and installation. If those decisions are made out of order, the problems are predictable. TVs end up too high, cable management becomes an afterthought, components overheat inside closed cabinets, or access panels get forgotten until something needs service.

Greater Vancouver homes add another layer of decision-making. Older houses in Vancouver, New Westminster, and parts of North Vancouver often have plaster walls, irregular framing, and design details worth preserving. Heritage properties can also come with limits on how far you should go in altering original features, so the right approach is often integration rather than replacement. Newer homes in Richmond, Coquitlam, and Burnaby usually give you straighter walls and cleaner conditions behind the drywall, but homeowners also tend to expect tighter detailing and less visible compromise.

Fireplace-adjacent media walls need extra care. Clearances, venting requirements, product specifications, and finish materials all need to be checked against the appliance and local permit requirements before the design is finalized. In practice, that usually means confirming the fireplace model early, then building the wall assembly around real installation requirements instead of guessing from a rendering.

Resale matters, but it should be viewed realistically. Well-built media walls can help a home show better and feel more finished, especially when they solve storage, improve proportion on a large wall, and match the architecture of the room. Poorly planned ones can do the opposite, particularly if they dominate a small room or look too trend-specific for the house.

A practical starting point is three decisions. Decide what the wall needs to do first. Storage, display, heating, acoustics, or all four. Then decide how permanent the solution should be. A modular system suits some condos and family rooms better than full custom millwork. Finally, sort out the technical details early: power, data, speaker locations, ventilation, mounting height, and future service access.

Permits can also shape the design. In cities such as Richmond, New Westminster, Coquitlam, and Vancouver, the permit path can change if the project includes new electrical work, structural changes, gas or electric fireplace installation, or work in a heritage home. Getting that answered early usually saves time and avoids redesign later.

A good media wall should look like it belongs in the house and work well five years from now, not just on installation day.

If you’re planning a media wall as part of a renovation in Vancouver, Burnaby, Richmond, North Vancouver, West Vancouver, New Westminster, Coquitlam, Port Coquitlam, or Port Moody, Domicile Construction Inc. can help you design and build a solution that fits your home properly. From heritage-sensitive millwork and fireplace integration to wiring, lighting, storage, and permit coordination, the team brings practical renovation experience to every stage of the project.